sheet metal plate in the bending on both sides of the extrusion due to the association of metal material bulge, resulting in the total width being larger than the original specification, the bulge size should be related to the material thickness, the thicker the bulge is larger, can be in advance in the bending line feeding, so that the bulge area of the material is larger than the original specification, the bulge size and should be related to the material thickness, the thicker the material is larger, can be solved in the same way.
Our Precision Sheet Metal Bending Service offers the highest level of accuracy and customization for a wide range of metal materials. Our experienced team utilizes advanced bending technology to deliver precise, clean bends with tight tolerances. With fast turnaround times and competitive pricing, our service provides unmatched quality and value for all your metal bending needs.
At Precision Sheet Metal Bending Service, our team strength lies in our dedication to delivering high-quality products with precision and efficiency. Our experienced team of skilled craftsmen and engineers work collaboratively to ensure that every project is completed to the highest standards. With a focus on innovation and continuous improvement, our team is constantly striving to exceed customer expectations and provide exceptional service. With a strong emphasis on teamwork and a commitment to excellence, you can trust that your sheet metal bending needs will be met with professionalism and expertise. Partner with us for all your sheet metal fabrication needs and experience the difference our team strength can make.
At Precision Sheet Metal Bending Service, our team strength lies in our highly skilled and experienced craftsmen who are dedicated to delivering top-quality products with precision and accuracy. Our team is trained in the latest bending techniques and is committed to providing excellent customer service and support throughout the entire process. With a collective focus on attention to detail, problem-solving, and innovation, our team ensures that every project is completed to the highest standards. Trust in our team's expertise and reliability to meet your sheet metal bending needs efficiently and effectively.
How to do the sheet metal bending process? Bergek is going to give you some technical information about sheet metal, which I hope will be helpful to you.
1, sheet metal plate in the bending on both sides of the extrusion due to the association of metal material bulge, resulting in the total width being larger than the original specification, the bulge size should be related to the material thickness, the thicker the bulge is larger, can be in advance in the bending line feeding, so that the bulge area of the material is larger than the original specification, the bulge size and should be related to the material thickness, the thicker the material is larger, can be solved in the same way.
2, sheet metal bending internal R Angle is better than or equal to 1/2 of the thickness of the material, if there is no R Angle, after several stamping, its bevel will gradually disappear, of course, will produce R Angle, after the R Angle of one side or two sides of the length will appear a trace of circumference.
3, sheet metal parts after bending trial easy to deform, in order to prevent deformation, can be raised on the bend at appropriate 45 degrees of strengthening help so that it does not interfere with other parts, so as to improve their compressive strength.
4. General sheet metal parts are slender, and can not maintain their straightness after the force is easy to deform, so we can fold an L shape or fold two sides, fold its compressive strength and straightness, but its verticality is difficult to maintain, after bearing the force is easier to deformation, so we can fold an L shape or fold two sides into one. At this time, appropriate convex ribs can be used to improve their compressive strength.
5, in the plan and bending surface in the middle of the turning point to have a narrow hole or open hole back bending, otherwise it will produce burrs, and the total width of the hole is better than 1.5 times the thickness of the meat, and drawing do not forget to mark R Angle, bevel and obtuse Angle of the mold and female mold is easy to crumble if the mold is easy to crumble.
6. At the outer corner of the copper sheet, if the Angle is not specified as 90 degrees, try to solve it into a moderate R Angle, because the bevel of the edge of the copper sheet is easy to produce sharp points, causing scratches to the staff. A bevel point is easy to crack due to stress so the mold is easy to crack at the vertex, prompting the mold shell must repair the mold and delay the batch production, so the mold shell repairs the mold in time to trim, resulting in the appearance of burr.
7, (1) discount side can be divided into unilateral discount and multilateral discount, if the accuracy of the provisions is a better multilateral discount, then do precision will be better, discount side height and width is better is 3 mm (t:1.0-1.2 mm), otherwise, too little clamping specifications will be unstable.
(2) When folding, the side wall part of the inner convex part should not be too close to the bottom edge, it is better to be more than 11mm, otherwise the edge under the bulge has no public die stamping, and its R Angle will be more than the upper and lower sides of the R Angle, R Angle can not exceed 11mm, otherwise it will affect our R Angle, so the folding can not exceed the public die.
(3) When folding, the hole on the inner wall of the edge should not be close to the bottom edge, and it should be kept above 3 mm, otherwise it will cause deformation because of bending. Before bending, we can punch the long strip hole, the width of 1.5 material thick strip hole on the upper side of the curve, what does this do? The shape can be detached without damaging the perforation.
Copyright © 2022 SHENZHEN BERGEK TECHNOLOGY CO., LTD. - www.bergekcnc.com All Rights Reserved.