One-stop solution for Sheet Metal Fabrication & CNC Machining - Bergek CNC
Language
One-stop solution for Sheet Metal Fabrication & CNC Machining - Bergek CNC
CNC lathe processing in the process of processing, if the tool selection is not right, it will lead to unstable processing or processing! And affect the power, but also does not make good quality. So the selection of tools is very important when we process raw materials that are relatively hard raw materials,
Manufactured by a china stainless steel turned parts manufacturer, these hard and thin-wall CNC stainless steel turned parts feature precision-turned geometry, tight tolerances and structural provisions for axial clamping to minimize deformation during machining. They deliver value through optimized tooling selection, sequencing and process checks that extend tool life, reduce rework and ensure consistent surface finish and dimensional accuracy. The thin-wall architecture requires low speed, slow feed, small sharp inserts and often multi-step or segmented machining (pressure-sleeve axial clamping recommended) to control cutting forces and produce burr-free, high-quality parts.
Specializing in precision CNC stainless steel turned parts, our company excels in machining hard materials and ultra-thin walls with micron-level tolerances. Advanced Swiss-style lathes, multi-axis CNC centers and dedicated thin-wall fixturing deliver consistent concentricity, superior surface finish and repeatable part geometry. We support rapid prototyping through volume production with strict ISO-quality controls, in-process inspection and full material traceability. Customers value our engineering-driven DFM support, customized tooling, competitive lead times and scalable capacity for automotive, medical, instrumentation and industrial applications. Committed to reliability, transparent communication and cost-effective sourcing, we turn complex stainless components into dependable, ready-to-assemble solutions with global delivery options.
Based in China, our company specializes in precision CNC machining of stainless steel turned parts, with deep expertise in hard materials and ultra-thin-wall components. Combining advanced multi-axis lathes, rigorous process control, and experienced engineers, we deliver consistent tolerances, superior surface finishes, and reliable mechanical performance. We offer custom engineering support, rapid prototyping, small to large-volume production, and strict quality assurance including dimensional inspection and material traceability. Certified to international standards, we focus on on-time delivery and competitive pricing. Trusted by global OEMs across automotive, medical, and industrial sectors, we turn complex designs into manufacturable, high-value products with responsive customer service.
CNC lathe in the process of processing the most simple problems and processing difficulties there are the following:
First, how to judge the good condition and service life of the tool?
1. In the active machining process of the machine tool, it is necessary to use the ear to hear the sound, check or touch the tooltip on time when the cutting process is stopped, and analyze and judge the surface finish, etc.
Two, how to reasonably choose the corresponding tool according to the characteristics of raw materials?
1, CNC lathe processing in the process of processing, if the tool selection is not right, it will lead to unstable processing or processing! And affect the power, but also does not make good quality. So the selection of tools is very important, when we process raw materials that are relatively hard raw materials, we should choose rigid relatively strong knife tip large tools, the machine should also choose low speed, slow feed, less back to eat, and other criteria to debug! So when processing raw materials are soft, such as aluminum alloy, nylon rod, copper, and other raw materials! Then we can improve the speed, feed, back knife, and the use of the corresponding alloy knife! In particular, the feed is slow and will form extrusion slag, around the workpiece, not broken slag. Thus, the power and quality will be greatly affected.
Three, when the process or cutting path is not well arranged to affect the power how to do it?
Try not to repeat the same knife used many times, to the end of a knife certainly doesn't have to be the second, and the row knife order program sequence under the conditions allow, must according to the dao way, as far as possible the tightening of idle time, reduce unnecessary positioning error, under the condition of the cutting tool or have no effect on the quality, once again, the optimization of the process, to reach the best processing condition. Four, in the processing of thin wall products simple deformation how do?
Such products are a little difficult, some may be divided into many processes to complete, according to the product requirements, to analyze and judge! Must use low speed, slow feed, less back to eat three processing elements! And to choose a small tip, the knife blade is sharp, clamping is also as far as possible to choose axial clamping (such as pressure screw sleeve), such as using radial home tight has been deformation state.
Bergek CNC is a world-class manufacturing service provider in Shenzhen. We have advanced equipment to provide a full range of customized products to manufacturers around the world, specializing in CNC machining and sheet metal processing.
If you have any question,please contact us.
Copyright © 2026 SHENZHEN BERGEK TECHNOLOGY CO., LTD. - www.bergekcnc.com All Rights Reserved.
