1. To add sand to the point: water cutting is divided into sand cutting and sand cutting two ways.
2. By equipment to point: divided into large water cutting machine, small water cutting machine, three-dimensional water cutting machine, dynamic water cutting machine.
3. By pressure: divided into the high-pressure type and low-pressure type, generally 100MPa as the limit.
Above 100MPa is high-pressure type, below 100MPa is low-pressure type, and above 200MPa is ultra high-pressure type.
4. According to the technical principle, it can be divided into the pre-mixing type and post-mixing type.
5 safety cutting points: divided into safe cutting class and unsafe cutting class, the difference is mainly in the water pressure above, 100MPa low-pressure water cutting can be applied to special industries such as dangerous chemical, oil, coal, dangerous material treatment and so on.
The characteristics of
1. CNC molding of various complex patterns;
2. Cold cutting, no thermal deformation or thermal effect;
3. Environmental protection, no pollution, no toxic gas, and dust;
4. Can process all kinds of high hardness materials, such as glass, ceramic, stainless steel, etc., or relatively soft materials, such as leather, rubber, diapers, etc
5. It is the only means of complex processing of some composite materials and fragile porcelain materials;
6. Smooth incision, no slag, no secondary processing;
7. Drilling, cutting, and forming can be completed at one time;
8. Low production cost;
9. High degree of automation;
10. 24 hours continuous operation
Finally, if you need to do the water cutting process, you can contact szBERGEK. Welcome to send drawings for customization.